How To Build Wooden Picnic Tables
Build your own picnic table will not only saves money, it is a practical project. You can use the dining table or as a meeting place. Most of them have capacity for at least six people. You can use leftover materials from your shop or pick up supplies at a local hardware store. Before you build your wooden picnic tables, it is important to cut the wood to size for easy assembly.
Wooden picnic tables measure and mark a piece of wood 2 x 4 x 6 in 30 3/4 inches (78.105 cm). Repeat this process three times. The pieces will serve as the four legs of the table. Circular fixed at an angle of 22.5 degrees and cut four pieces of wood you saw. Leave them aside.
12 Photos Gallery of: How to Build Wooden Picnic Tables
Wooden picnic tables measure and mark two pieces of wood 2 x 4 x 6 so as to have a length of 30 1/2 inches (77.47 cm). These serve as a reinforcement of the upper transverse table. The table top is screwed into this piece. Cut the upper transverse reinforcement at an angle of 22.5 degrees with your circular saw. Brand of them aside. Measure and mark two pieces of 2 x 4 x 6 so as to have a length of 54 1/4 inches (137.795 cm). These pieces will serve as the central reinforcement for your picnic table.
Wooden Picnic Tables and Chairs
Wooden picnic tables – There is no reason to go out and buy new furniture when restoring old furniture is very well more cost effective and fun. You may already have a wooden picnic tables are old, or you can pick one up at a flea market or antique shop.
To start the fix wooden picnic tables is nothing to be concerned about. Wooden picnic tables you can wash by spraying the table below with a hose to clean dust and dirt like cobwebs. After all had been sprayed, you can proceed to your cleaning solution. Special wood cleaners and cleaners wooden deck either works well to remove dirt and discoloration while restoring some of the original color of the furniture.
If you have a few stubborn extra places you can work in a good solvent solution of concentrated chlorine or bleach mixed with water, but be careful when working with caustic substances. Whatever you use, apply the entire solution using a hose or a cloth and allow setting for a few minutes. Then, using two stiff brushes, one large, and one small to rub any flat surface and also down into the cracks wooden picnic table you. When wooden picnic tables you as clean as you want, rinse every trace remnants of dust.